Add an entry to the Phone book
1
- Nokia 6590
- >
- Nokia 6590 User Guide
- >
- 5 Use the phone book
- >
- • Open the Phone book
- >
- Add an entry to the Phone book
Nokia 6590 - Add an entry to the Phone book
Nokia 6590 > Add an entry to the Phone book
- Nokia 6590 User Guide
- Phone notes
- Topics
- Contents
- 1 Safety first
- SWITCH OFF WHERE PROHIBITED
- ROAD SAFETY COMES FIRST
- INTERFERENCE
- SWITCH OFF IN HOSPITALS
- SWITCH OFF IN AIRCRAFT
- SWITCH OFF WHEN REFUELING
- SWITCH OFF NEAR BLASTING
- USE SENSIBLY
- OBSERVE INFRARED PRECAUTIONS
- QUALIFIED SERVICE
- ACCESSORIES AND BATTERIES
- WATER-RESISTANCE
- BACKUP COPIES
- CONNECTING TO OTHER DEVICES
- CALLING
- EMERGENCY CALLS
- 2 Welcome
- • Get the most out of this guide
- • Learn about accessibility solutions
- • Understand wireless network services
- • Register your phone
- • E-newsletters
- • Get help
- • Understand your phone
- Keys and features
- Tips on efficient operation
- Install the SIM card
- 1 With the back of the phone facing you, press and hold the back cover release button.
- 2 Slide the cover off.
- 3 Lift out the battery.
- 4 Grasp the front of the SIM card door.
- 5 Push the SIM card door gently towards the gold contacts.
- 6 Lift the SIM card door.
- 7 Install the SIM card; beveled corner on the left, gold contact area face down.
- 8 Lower SIM card door and gently slide to lock into place.
- Notes about SIM cards
- Install the battery
- Charge the battery
- Remove the battery
- Important battery information
- Learn the keys
- Dynamic memory use
- Quick guide
- Menu Shortcuts
- 3 Basic operations
- • Switch on your phone
- • About the Start screen
- • Review phone symbols
- • Make and answer calls
- 1 Enter the area code and phone number.
- 2 Press .
- 3 Hold the phone with the earpiece over your ear and microphone near your mouth, or connect and u
- Adjust the earpiece volume during a call
- If an accessory with its own speaker is connected to your phone, the volume keys adjust the volu
- Caller ID
- Redial the last-dialed number
- Dial any of the 20 last-dialed numbers
- • Use the menu
- Use the scroll method
- Help text
- Use a menu shortcut
- List of menu shortcuts
- 1 Messages
- 2 Call log
- 3 Profiles
- 4 Settings
- 5 Radio
- 6 Organizer
- 7 Extras
- 8 Games
- 9 Infrared
- 10 Services
- 11 SIM services
- • Set up your Phone
- 4 Text entry
- 5 Use the phone book
- • Your phone’s memory
- • View the phone book
- • Open the Phone book
- 1 At the Start screen, press Names. The submenus in the following table appear in the display.
- 2 Use the scroll key ( or ) to highlight an option. Press Select () to activate an option or ente
- Add an entry to the Phone book
- 1 At the Start screen press Names, scroll to Add entry, and press Select.
- 2 Enter a name for the entry and press OK.
- 3 Enter the area code and number for the entry and press OK. The name and number are saved to the
- 1 At the Start screen, enter the area code and number you’d like to save
- 2 Press and hold Options. The number is saved to your Phone book as a stand-alone entry.
- Add a number to a phone book entry
- 1 At the Start screen, enter the area code and number you’d like to save.
- 2 Press Options and scroll to Add to name.
- 3 Press Select. The phone book name list appears.
- 4 Scroll to the name that you want to add the number to and press Addno. A list of number types
- 5 Scroll to the number type of your preference and press Select. A confirmation message appears i
- Number types
- Assign or change a number type
- 1 At the Start screen, press the scroll key ( or ) to display your Phone book entries.
- 2 Scroll to the entry containing the numbers you wish to change and press Details.
- 3 Use the scroll key to highlight the number you wish to change and press Options.
- 4 Scroll to Change type and press Select.
- 5 Scroll to the number type of your preference and press Select. A confirmation message appears i
- Assign or change a number type
- Add details to a Phone book entry
- Save a number (only)
- Scroll through Phone book entries
- Search for Phone book entries
- 1 At the Start screen, press the scroll key ( or ) to display your Phone book.
- 2 Press the key which contains the first letter of the entry you’re searching (example; press twi
- 3 Continue entering letters to locate the entry, or move through and highlight other entries usin
- 4 Once you’ve highlighted the desired entry, press to dial the number. Or, press Details, then pr
- 5 Scroll to an option. Press Select to activate an option or to enter its submenu.
- Edit names
- Erase names and numbers
- Erase a single entry
- Erase all names and numbers
- 1 At the Start screen, press Names, scroll to Erase and press Select.
- 2 Ensure Erase all is highlighted and press Select.
- 3 Scroll to Phone or SIM card and press Erase.
- 4 Press OK to confirm or Back to select from Phone or SIM card again. If you pressed OK, you’re p
- 5 Enter the security code and press OK to erase or Back to select from Phone or SIM card again.
- Assign a primary number
- 1 At the Start screen, press or to display a list of Phone book entries.
- 2 Scroll to a name containing multiple numbers and press Details.
- 3 Scroll to the number you’d like to assign as the primary number (or change to the primary numbe
- 4 Scroll to As primary no. and press Select. Now, the phone dials the primary number when you sel
- Add an E-mail address
- 1 Press Names. Find appears highlighted.
- 2 Press Select. The Name box appears.
- 3 Enter the name you want to add an e-mail address to and press OK. OR Press List, or or to scrol
- 4 Press Details, then press Options.
- 5 Scroll to Add detail, then press Select. E-mail appears highlighted.
- 6 Press Select. The Text box appears.
- 7 Enter the e-mail address, then press OK.
- Copy Phone book entries
- 1 At the Start screen, press Names, scroll to Copy, and press Select.
- 2 Scroll to From phone to SIM card or From SIM card to phone and press Select. The following opti
- 3 Scroll to the copy method of your choice and press Select.
- 4 Scroll to the entry you wish to copy and press Copy.
- 5 Scroll to Keep original or Move original and press Select. The entry is copied and you’re retur
- 6 If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and pre
- 7 Press OK to confirm your choice. All entries are copied to the selected destination. Press Back
- View service numbers
- Use caller groups
- 6 Check call log
- • Check for missed calls
- • Check received calls
- • Check dialed numbers
- • Clear call lists
- • Use call timers
- • Check data calls
- • Manage call costs
- 7 Use voice features
- • About Voicemail
- • Save the voice mailbox number
- • Set up your voicemail
- • Automate Voicemail with dialing codes
- • Use voice dialing
- Add a voice tag to a phone book entry
- 1 At the Start screen, scroll to the name you want to give a voice tag.
- 2 Press Details, then Options. Add voice tag appears highlighted.
- 3 Press Select. The phone displays Press Start, then speak after tone.
- 4 Press Start. You will hear several beeps, and Please speak now appears.
- 5 Speak clearly into the microphone.
- Notes about voice tags
- Make a call using a voice tag
- Listen to a voice tag
- Change or erase a voice tag
- Scroll to Change or Erase and press Select.
- Add a voice tag to a phone book entry
- • Use voice commands
- View available functions
- Add a voice tag for the command
- Activate a voice command
- Work with an existing voice command tag
- Play back a voice command tag
- 1 Press Menu 7-3 (Extras> Voice commands) A list of phone functions appears, with Profiles highli
- 2 Scroll to the phone function containing the voice command you want to hear and press Select. Fo
- 3 Scroll to the profile with the voice command you want to hear. Look for the voice tag icon ().
- 4 Press Options. Playback appears highlighted.
- 5 Press Select. Playing voice command appears as the phone plays the command.
- CHange or erase a voice command tag
- 1 At the Start screen, press Menu 7-3 (Extras > Voice commands).
- 2 After a brief pause, the list of phone functions appears in the display.
- 3 Scroll to the feature you wish to modify and press Select.
- 4 When the command you wish to modify appears in the display, press Options.
- 5 Scroll to Change or Erase and press Select.
- Play back a voice command tag
- 8 Messages
- Understand text messaging
- Message icons
- i
- • Set up message profiles
- Choose a message sending profile
- Save the message center number
- Choose the message format
- Choose other message settings
- Set up additional message sending profiles
- 1 Press Menu-01-14-1-1(Messages > Message settings > Text messages > Sending profile Sending prof
- 2 Scroll to the profile you want (Profile 2, 3, or 4), and press Select. For example, Profile 2.
- 3 Follow the steps under “Save the message center number” on page73.
- 4 After saving the message center number, scroll to Messagessentas and press Select.
- 5 Scroll to the message format you want and press OK. For example, E-mail.
- 6 Scroll to E-mail server and press Select.
- 7 Enter the e-mail server number and press Options.
- 8 Accept appears highlighted.
- 9 Press Select. A confirmation message appears.
- • Write a message
- 1 Press Menu and Select. (Messages > Write message).
- 2 Write the message. The indicator in the upper right corner shows the number of characters avail
- Send a message as text
- Send to one
- Send to many
- 1 When you’re finished writing, press Options, then scroll to Sending options.
- 2 Press Select. Send to many appears highlighted.
- 3 Press Select. The phone book appears.
- 4 Scroll to the first name that you want to send the message to and press OK. Confirmation messag
- 5 Scroll to another name and press OK. Continue sending the message to as many names in your phon
- 6 When you’re finished sending the message, press Done, then press Back twice to return to the me
- Send the message as e-mail
- 1 After composing your message using the keypad, press Options.
- 2 Scroll to Sending options and press Select.
- 3 Scroll to Sending profile and press Select.
- 4 Scroll to the profile you set up for sending e-mail, and press Select.
- 5 Enter the recipient’s e-mail address (or press Find and retrieve it from your Phone book) and p
- 6 The e-mail server number box appears. Enter the number and press OK. Your e-mail is sent.
- Send a text message as a fax
- Save messages in the outbox
- Resend a message from the outbox
- 1 Press Menu, then press Select.
- 2 Scroll to Outbox, then press Select.
- 3 Scroll to the message you want to resend, then press Select. The message appears on the screen.
- 4 Press Options and scroll to Send. As txt msg and As e-mail appear.
- 5 Scroll to your choice and press Select.
- As text message
- As e-mail
- 1 After you’ve selected As e-mail, the E-mail address box appears.
- 2 Enter the recipient’s e-mail address (or press Find and retrieve it from your Phone book) and p
- 3 The Subject appears. Enter a subject for the e-mail and press OK. The message appears again.
- 4 Press Options. Send e-mail appears highlighted.
- 5 Press Select. The message is sent.
- Send a message from the phone book
- Choose a name
- Send a text message
- 1 When the name appears, scroll to the phone number you want (if there is more than one stored) a
- 2 Scroll to Send message and press Select.
- 3 Write your message using the keypad.
- 4 When you’re finished writing, press Options. Send appears highlighted.
- 5 Press Select. The message is sent and confirmation messages appear.
- Send an e-mail message
- 1 When the name appears, scroll to the email address and press Options. Send e-mail appears highl
- 2 Press Select. The Subject box appears.
- 3 Enter a subject for the e-mail and press OK. The message screen appears.
- 4 Write your message using the keypad.
- 5 Once you have finished writing, press Options. Send e-mail appears again
- 6 Press Select. If the E-mail server number box appears, enter the number for your service provid
- • Read text messages
- • Store messages
- Save a message to a folder
- Add a folder of your own
- Remove a folder
- 1 At the Start screen, press Menu, then press Select.
- 2 Scroll to My folders, then press Select. Any folders that you’ve created appear in the display.
- 3 Scroll to the folder you wish to remove and press Options.
- 4 Scroll to Delete folder and press Select.
- 5 Press OK if you wish to delete and Back if you wish to exit.
- Move a message to a folder
- • Chat with other phone users
- About the chat screen
- Start a chat session
- 1 Press Menu, then press Select.
- 2 Scroll to Chat, then press Select.
- 3 Enter the other party’s phone number or recall it from the phone book and press OK.
- 4 Enter your chat name and press OK.
- 5 Write your chat message, press Options, then press Send.
- 6 Press OK to clear the screen and reply to the message.
- Use predictive text for quick replies
- View chat history
- Change your nickname
- End your chat session
- • Use picture messages
- Notes about picture messages
- Send picture messages
- 1 Press Menu, then Select.
- 2 Scroll to Templates, then press Select.
- 3 Scroll to the picture you want to send, and press Select. The picture appears. To choose a diff
- 4 Press Options, scroll to Send, then press Select.
- 5 Recall or enter the phone number to which you want to send the picture message.
- 6 Press OK.
- Send picture messages with text
- 1 Press Menu 01-1 (Messages > Write messages).
- 2 Enter your message, then press Options.
- 3 Scroll to Attach picture, then press Select.
- 4 Scroll to the picture you want to send, then press View.
- 5 After viewing the picture, select Attach.
- 6 Select Options, scroll to Send,
- 7 Enter the phone number or recall a number from your phone book, then press OK.
- Receive picture messages
- 1 When your phone displays Message received, press Show. The picture appears along with the sende
- 2 If the picture has a text message with it, scroll up or down to see the entire message.
- 3 Press Options. All message handling options are available, including Save picture.
- 4 To save the picture message, scroll to Save picture and press Select.
- 5 The Picture title box appears. Edit the text in the box, if needed and press OK. The picture me
- Preview, change, or erase a picture message
- • Use a template
- Send a template message
- 1 At the Start screen, press Menu 01-8 (Messages - Templates). After a brief pause, the templates
- 2 Scroll to the template of your choice and press Select. Available templates are as follows:
- 3 If you’d like to send the template as it is, press Options, scroll to Send, and press Select. T
- a) Press Options, scroll to Edit instead of Send and press Select. As text msg. and As e-mail app
- b) Scroll to your choice, press Select, and edit the message.
- c) Press Options. Send appears highlighted.
- d) If you want to save the template before sending, scroll to Save message (instead of Send), and
- e) Press OK to save over the original template, or press No to save it as a new template to a fol
- 4 Refer to “Send a message as text” on page76, or “Send the message as e-mail” on page77.
- Insert a template into a message
- Create a custom template
- Send a template message
- • Receive multimedia messages (MMS)
- Message receiving limitations
- Define MMS settings
- Allow multimedia reception
- You can choose to receive all messages or to receive messages only when you are in your service p
- 1 Press Menu, then press Select.
- 2 Scroll up to Message settings, then press Select.
- 3 Scroll to Multimedia msg., then press Select.
- 4 Scroll to Allow multimedia reception, then press Select.
- 5 Scroll to one of the following, then press Select:
- 6 Scroll to Incoming multimedia messages, then press Select.
- 7 Scroll to Retrieve, then press Select.
- Block all messages
- Allow advertisements
- Block advertisements
- About Connection settings
- View a multimedia message
- Discard a multimedia message
- Choose multimedia message options
- • Use the info message service
- • Use the service command editor
- 9 Personalize your phone
- • Profiles
- Select a profile
- Customize a profile
- Set a timed profile
- Accessory profiles
- Default profile
- 1 Press Menu 4-5 (Settings>Accessory settings) Headset appears highlighted.
- 2 Press Select. Default profile appears along with Current profile.
- 3 Press Select. Current profile appears highlighted, along with a list of profiles.
- 4 Scroll to the profile you want and press Select. For example, Silent. A confirmation message ap
- Set automatic answer
- Set up the loopset profile
- Set up car profile
- Adjust volume control
- Default profile
- • Choose the display language
- • Set up the clock
- • Download ringing tones
- • Use a screen saver
- • Restore factory settings
- • Profiles
- 10 Advanced calling features
- • Active call options
- Use call waiting
- Use in-call options
- Put a call on hold
- Make a new call
- Send touch tones
- End all calls
- Access the phone book
- Access menus
- Mute/unmute the microphone
- Make a conference call
- 1 Place a call to the first person.
- 2 Press Options and scroll to New call.
- 3 Press Select, recall or dial the number of the next party you want to include, then press Call.
- 4 After the other party answers, press Options.
- 5 Scroll to Conference, then press Select.
- 6 To add other parties to the call, repeat steps 2 through 5.
- 7 To end the conference call, press .
- Have a private conversation with a participant
- Drop a participant from the conference call
- • Use call forwarding
- • Use anykey answer
- • Use automatic redial
- • Send your own number in caller ID
- • Use 1-touch dialing
- • Make an international call
- • Select a system
- • Active call options
- 11 Manage phone security
- • Lock the keypad (Keyguard)
- • About Access codes
- The security code
- Change your security code
- 1 Press Menu 4-7-6-1 (Settings > Security settings > Access codes > Change security code).
- 2 Enter the current security code and press OK. You’re prompted to enter the new security code.
- 3 Enter the new security code (up to 10 characters) and press OK. You’re asked to re-enter the ne
- 4 Enter the new security code again and press OK. A message appears in the display confirming you
- Change your security code
- The PIN code
- PIN code request
- Change your PIN code
- 1 Press Menu 4-7-6-2 (Settings > Security settings > Access codes > Change PIN code).
- 2 After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and pres
- 3 You’re prompted to enter the new PIN code. Enter the new PIN code and press OK.
- 4 You’re prompted to re-enter the new PIN code for verification. Enter the new PIN code again and
- The PIN2 Code
- Change your PIN2 code
- 1 Press Menu 4-7-6-3 (Settings > Security settings > Access codes > Change PIN2 code). You’re pro
- 2 Enter the current PIN2 code and press OK. You’re prompted to enter the new PIN2 code.
- 3 Enter the new PIN2 code and press OK. You’re asked to verify the new PIN2 code by entering it a
- 4 Enter the new PIN2 code again and press OK. A message appears in the display confirming you’ve
- Change your PIN2 code
- Personal unblocking key (PUK) codes
- The security code
- • Use call restrictions
- Turn fixed dialing on or off
- Add numbers to the fixed dialing list
- 1 Press Menu 4-7-3 (Settings > Security settings > Fixed dialing).
- 2 Scroll to Number list, then press Select.
- 3 Scroll to Add, then press Select.
- 4 Enter your PIN2 code and press OK.
- 5 Enter a name to go with the restricted phone number, then press OK.
- 6 Enter the phone number you want to restrict, then press OK.
- • Restrict calls
- • Set up a closed user group
- 12 Your wireless Internet browser
- • Notes on wireless Internet access
- • Set up for browsing
- • Sign on to the Internet
- • Use browser options
- • Navigate the wireless Internet
- • Use bookmarks
- • Disconnect from the Internet
- • Security issues
- • Notes about GPRS
- 13 Your personal digital assistant
- • Use the alarm clock
- • Use the calendar
- Open the Calendar
- Set the date
- Set the date format
- Use four-way scrolling
- Jump to a date
- Make a note for a specific date
- View calendar notes - the Day view
- Options while viewing the notes list
- Options while viewing a note
- Send a Calendar note to another device
- Send a note via Infrared or SMS
- 1 At the Start screen, press Menu 6-2 (Organizer - Calendar). After a brief pause, the monthly vi
- 2 Jump, or scroll to the date containing the note you wish to send.
- 3 Press Options, scroll to View day, and press Select.
- 4 Scroll to the note you wish to send and press Options.
- 5 Scroll to Send note and press Select.
- 6 Scroll to Send via IR, Send as note, or Send as text, and press Select.
- 7 If you selected Send via IR, align the infrared ports of both devices and press Select. The not
- 8 If you selected Send as note, enter the number for the recipient (or press Find to retrieve a n
- 9 Press Options, scroll to Send, and press Select.
- 10 Enter the number for the recipient (or press Find to retrieve a number from your Phone book),
- Receive Calendar notes from another device
- View received Calendar notes
- Save received Calendar notes
- Discard viewed Calendar notes
- Send a note via Infrared or SMS
- • Make a to-do list
- Add a to-do note
- 1 At the Start screen, press Menu 6-3 (Organizer - To-do list).
- 2 After a brief pause, press Options. If this is your first time to use the to-do list, Add is hi
- 3 Press Select, enter your to-do note and press Options.
- 4 Scroll to Save and press Select.
- 5 Scroll to High, Medium, or Low priority and press Select. The to-do note is saved.
- Choose other to-do options
- Add a to-do note
- • Use the calculator
- 1 At the Start screen, press Menu 7-1 (Extras >Calculator). After a brief pause, the calculator s
- 2 Enter the first number in your calculation.
- 3 Enter the second number in your calculation.
- 4 Press Options. The following list of options appear in the display. Use the scroll keys to high
- 5 Press Select to complete the calculation as selected in the calculator options. The sum of your
- Use currency conversion
- • Use the voice recorder
- Record a memo
- 1 Press Menu 7-2 (Extras > Voice recorder). Record appears highlighted.
- 2 To begin recording, scroll to Record, then press Select.
- 3 Clearly state your note. When you are finished, press Stop. The Title: box appears on the scree
- 4 Key in a name for the recording and press OK to save it. Recording saved appears on the screen.
- 1 Press Clear to erase the name. Then press Back. Recording will not be not saved. Continue? appe
- 2 Press OK.
- Record a phone conversation
- Listen to or edit a memo
- Set an alarm
- Notes about voice memos
- Record a memo
- • Use the countdown timer
- • Use the stopwatch
- Measure split time
- 1 Press Menu 7-5 (Extras > Stopwatch).
- 2 Scroll to Split timing, then press Select.
- 3 Press Start.
- 4 Press Split to take an intermediate time.
- 5 When you’re finished timing, press Stop, then press Options.
- 6 Save appears highlighted. If you want to save the time, see “Save the time” on page147.
- 7 Scroll up to Start and press Select to continue, OR Scroll down to Reset and press Select to se
- Measure lap time
- 1 Press Menu 7-5 (Extras > Stopwatch).
- 2 Scroll to Lap timing, then press Select.
- 3 Press Start.
- 4 Press Lap to take a lap time.
- 5 When you’re finished timing, press Stop, then press Options.
- 6 Save appears highlighted. If you want to save the time, see “Save the time” below.
- 7 Scroll up to Start and press Select to continue. OR Scroll down to Reset and press Select to se
- Save the time
- Choose other stopwatch options
- Measure split time
- • Share business cards
- 14 Fun and games
- • FM Radio
- Turn the radio on
- Set a frequency
- Direct entry
- Manual Search
- Automatic tuning
- Save frequencies in the phone’s memory
- 1 With the frequency displayed in the screen, press Options.
- 2 Scroll to Save channel and press Select. The Channel name box appears.
- 3 Key in a name for the channel, and press OK. For example, KWCR. Select channel location appears
- 4 The next open channel location number appears. OR Scroll to the channel location number you wan
- Recall a stored frequency
- Change channels
- Handle calls while listening to the radio
- • Game rules
- • Nokia Sugar bowl
- • Snake II
- • Space Impact
- • Bumper
- • FM Radio
- 15 Advanced features
- • Your phone and other devices
- • Prepare the devices for IR connection
- • Infrared basics
- • Send and receive information
- • PC connectivity
- • GPRS dial-up connections
- 16 Reference information
- • Battery statements
- • Important safety information
- • Emergency calls
- 1 If the phone is not on, switch it on. Check for adequate signal strength.
- 2 Press as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the
- 3 Key in the emergency number for your present location (for example, 911 or other official emerg
- 4 Press the key.
- Certification Information (SAR)
- • Care and maintenance
- • Accessories
- • Battery information
- • Chargers and other accessories
- Standard Travel Charger (ACP7)
- Rapid Travel Charger (ACP-8)
- Travel Charger (ACP-12)
- Rapid Cigarette Lighter Charger (LCH-9)
- Desktop Stand (DCD-1)
- Spare Battery Charger (DDC-1)
- Full Car Kit (CARK-132)
- Express Car Kit (CARK-130)
- Mobile holder (MBD-10)
- Headset Kit (HDC-5)
- HDD-1 Dual headset
- Loopset LPS-3
- Leather carry case CSH-3
- Leather carry case CSL-18
- Microfiber carry case CSM-10
- 17 Technical information
- 18 Troubleshooting
- 19 Frequently asked questions (FAQ)
- 20 Nokia One-Year Limited Warranty
- 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purc
- 2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is
- 3 The limited warranty extends only to Consumers who purchase the Product in the United States of
- 4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any
- 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Produ
- 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia
- 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the follo
- a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposur
- b) The Product has been damaged from external causes such as collision with an object, or from fi
- c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the P
- d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
- e) The defect or damage was caused by the defective function of the cellular system or by inadequ
- 8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem devel
- a) The Consumer shall return the Product to the place of purchase for repair or replacement proce
- b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the
- c) The Consumer shall include a return address, daytime phone number and/or fax number, complete
- d) The Consumer will be billed for any parts or labor charges not covered by this limited warrant
- e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the P
- f) If the Product is returned during the limited warranty period, but the problem with the Produc
- 9 You (the Consumer) understand that the product may consist of refurbished equipment that contai
- 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE
- 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year war
- 12 Nokia neither assumes nor authorizes any authorized service center or any other person or enti
- 13 This is the entire warranty between the Nokia and the Consumer, and supersedes all prior and c
- 14 This limited warranty allocates the risk of failure of the Product between the Consumer and No
- 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months fol
- 16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Servi
- 17 The limited warranty period for Nokia supplied attachments and accessories is specifically def
- Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all user
- A Guide to Safe and Responsible Wireless Phone Use
- 1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read
- 2 When available, use a hands free device. A number of hands free wireless phone accessories are
- 3 Position your wireless phone within easy reach. Make sure you place your wireless phone within
- 4 Suspend conversations during hazardous driving conditions or situations. Let the person you are
- 5 Do not take notes or look up phone numbers while driving. If you are reading an address book or
- 6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or befor
- 7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emo
- 8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you
- 9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfe
- 10 Call roadside assistance or a special wireless non-emergency assistance number when necessary.
- A Guide to Safe and Responsible Wireless Phone Use
- Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones.
- Index
Powered by helpdoc.net